Ticker

6/recent/ticker-posts

Header Ads Widget

Shared Hosting with Namecheap. Free .Website domain & WhoisGuard

Learn 10 good UNIX usage habits


Listing 1 illustrates one of the most common bad UNIX habits around: defining directory trees one at a time.

Listing 1. Example of bad habit #1: Defining directory trees individually
~ $ mkdir tmp
~ $ cd tmp
~/tmp $ mkdir a
~/tmp $ cd a
~/tmp/a $ mkdir b
~/tmp/a $ cd b
~/tmp/a/b/ $ mkdir c
~/tmp/a/b/ $ cd c
~/tmp/a/b/c $

It is so much quicker to use the -p option to mkdir and make all parent directories along with their children in a single command. But even administrators who know about this option are still caught stepping through the subdirectories as they make them on the command line. It is worth your time to conscientiously pick up the good habit:

Listing 2. Example of good habit #1: Defining directory trees with one command
~ $ mkdir -p tmp/a/b/c
            

You can use this option to make entire complex directory trees, which are great to use inside scripts; not just simple hierarchies. For example:

Listing 3. Another example of good habit #1: Defining complex directory trees with one command
~ $ mkdir -p project/{lib/ext,bin,src,doc/{html,info,pdf},demo/stat/a}
            

In the past, the only excuse to define directories individually was that your mkdir implementation did not support this option, but this is no longer true on most systems. IBM AIX® mkdir, GNU mkdir, and others that conform to the Single UNIX Specification now have this option.
For the few systems that still lack the capability, use the mkdirhier script (see Resources), which is a wrapper for mkdir that does the same function:
~ $ mkdirhier project/{lib/ext,bin,src,doc/{html,info,pdf},demo/stat/a}
            

Another bad usage pattern is moving a .tar archive file to a certain directory because it happens to be the directory you want to extract it in. You never need to do this. You can unpack any .tar archive file into any directory you like -- that is what the -C option is for. Use the -C option when unpacking an archive file to specify the directory to unpack it in:

Listing 4. Example of good habit #2: Using option -C to unpack a .tar archive file
~ $ tar xvf -C tmp/a/b/c newarc.tar.gz
            

Making a habit of using -C is preferable to moving the archive file to where you want to unpack it, changing to that directory, and only then extracting its contents -- especially if the archive file belongs somewhere else.
You probably already know that in most shells, you can combine commands on a single command line by placing a semicolon (;) between them. The semicolon is a shell control operator, and while it is useful for stringing together multiple discrete commands on a single command line, it does not work for everything. For example, suppose you use a semicolon to combine two commands in which the proper execution of the second command depends entirely upon the successful completion of the first. If the first command does not exit as you expected, the second command still runs -- and fails. Instead, use more appropriate control operators (some are described in this article). As long as your shell supports them, they are worth getting into the habit of using them.
Use the && control operator to combine two commands so that the second is run only if the first command returns a zero exit status. In other words, if the first command runs successfully, the second command runs. If the first command fails, the second command does not run at all. For example:

Listing 5. Example of good habit #3: Combining commands with control operators
~ $ cd tmp/a/b/c && tar xvf ~/archive.tar
            

In this example, the contents of the archive are extracted into the ~/tmp/a/b/c directory unless that directory does not exist. If the directory does not exist, the tar command does not run, so nothing is extracted.
Similarly, the || control operator separates two commands and runs the second command only if the first command returns a non-zero exit status. In other words, if the first command is successful, the second command does not run. If the first command fails, the second command does run. This operator is often used when testing for whether a given directory exists and, if not, it creates one:

Listing 6. Another example of good habit #3: Combining commands with control operators
~ $ cd tmp/a/b/c || mkdir -p tmp/a/b/c
            

You can also combine the control operators described in this section. Each works on the last command run:

Listing 7. A combined example of good habit #3: Combining commands with control operators
~ $ cd tmp/a/b/c || mkdir -p tmp/a/b/c && tar xvf -C tmp/a/b/c ~/archive.tar
            


Always be careful with shell expansion and variable names. It is generally a good idea to enclose variable calls in double quotation marks, unless you have a good reason not to. Similarly, if you are directly following a variable name with alphanumeric text, be sure also to enclose the variable name in curly braces ({}) to distinguish it from the surrounding text. Otherwise, the shell interprets the trailing text as part of your variable name -- and most likely returns a null value. Listing 8 provides examples of various quotation and non-quotation of variables and their effects.

Listing 8. Example of good habit #4: Quoting (and not quoting) a variable
~ $ ls tmp/
a b
~ $ VAR="tmp/*"
~ $ echo $VAR
tmp/a tmp/b
~ $ echo "$VAR"
tmp/*
~ $ echo $VARa

~ $ echo "$VARa"

~ $ echo "${VAR}a"
tmp/*a
~ $ echo ${VAR}a
tmp/a
~ $


You have probably seen code examples in which a backslash (\) continues a long line over to the next line, and you know that most shells treat what you type over successive lines joined by a backslash as one long line. However, you might not take advantage of this function on the command line as often as you can. The backslash is especially handy if your terminal does not handle multi-line wrapping properly or when your command line is smaller than usual (such as when you have a long path on the prompt). The backslash is also useful for making sense of long input lines as you type them, as in the following example:

Listing 9. Example of good habit #5: Using a backslash for long input
~ $ cd tmp/a/b/c || \
> mkdir -p tmp/a/b/c && \
> tar xvf -C tmp/a/b/c ~/archive.tar
            

Alternatively, the following configuration also works:

Listing 10. Alternative example of good habit #5: Using a backslash for long input
~ $ cd tmp/a/b/c \
>                 || \
> mkdir -p tmp/a/b/c \
>                    && \
> tar xvf -C tmp/a/b/c ~/archive.tar
            

However you divide an input line over multiple lines, the shell always treats it as one continuous line, because it always strips out all the backslashes and extra spaces.
Note: In most shells, when you press the up arrow key, the entire multi-line entry is redrawn on a single, long input line.
Most shells have ways to group a set of commands together in a list so that you can pass their sum-total output down a pipeline or otherwise redirect any or all of its streams to the same place. You can generally do this by running a list of commands in a subshell or by running a list of commands in the current shell.
Use parentheses to enclose a list of commands in a single group. Doing so runs the commands in a new subshell and allows you to redirect or otherwise collect the output of the whole, as in the following example:

Listing 11. Example of good habit #6: Running a list of commands in a subshell
~ $ ( cd tmp/a/b/c/ || mkdir -p tmp/a/b/c && \
> VAR=$PWD; cd ~; tar xvf -C $VAR archive.tar ) \
> | mailx admin -S "Archive contents"
            

In this example, the content of the archive is extracted in the tmp/a/b/c/ directory while the output of the grouped commands, including a list of extracted files, is mailed to the admin address.
The use of a subshell is preferable in cases when you are redefining environment variables in your list of commands and you do not want those definitions to apply to your current shell.
Use curly braces ({}) to enclose a list of commands to run in the current shell. Make sure you include spaces between the braces and the actual commands, or the shell might not interpret the braces correctly. Also, make sure that the final command in your list ends with a semicolon, as in the following example:

Listing 12. Another example of good habit #6: Running a list of commands in the current shell
~ $ { cp ${VAR}a . && chown -R guest.guest a && \
> tar cvf newarchive.tar a; } | mailx admin -S "New archive"
            


Use the xargs tool as a filter for making good use of output culled from the find command. The general precept is that a findrun provides a list of files that match some criteria. This list is passed on to xargs, which then runs some other useful command with that list of files as arguments, as in the following example:

Listing 13. Example of the classic use of the xargs tool
~ $ find some-file-criteria some-file-path | \
> xargs some-great-command-that-needs-filename-arguments
                
            

However, do not think of xargs as just a helper for find; it is one of those underutilized tools that, when you get into the habit of using it, you want to try on everything, including the following uses.
In its simplest invocation, xargs is like a filter that takes as input a list (with each member on a single line). The tool puts those members on a single space-delimited line:

Listing 14. Example of output from the xargs tool
~ $ xargs
                a
                b
                c
                
                    Control-D
                
a b c
~ $

You can send the output of any tool that outputs file names through xargs to get a list of arguments for some other tool that takes file names as an argument, as in the following example:

Listing 15. Example of using of the xargs tool
~/tmp $ ls -1 | xargs
December_Report.pdf README a archive.tar mkdirhier.sh
~/tmp $ ls -1 | xargs file
December_Report.pdf: PDF document, version 1.3
README: ASCII text
a: directory
archive.tar: POSIX tar archive
mkdirhier.sh: Bourne shell script text executable
~/tmp $

The xargs command is useful for more than passing file names. Use it any time you need to filter text into a single line:

Listing 16. Example of good habit #7: Using the xargs tool to filter text into a single line
~/tmp $ ls -l | xargs
-rw-r--r-- 7 joe joe 12043 Jan 27 20:36 December_Report.pdf -rw-r--r-- 1 \
root root 238 Dec 03 08:19 README drwxr-xr-x 38 joe joe 354082 Nov 02 \
16:07 a -rw-r--r-- 3 joe joe 5096 Dec 14 14:26 archive.tar -rwxr-xr-x 1 \
joe joe 3239 Sep 30 12:40 mkdirhier.sh
~/tmp $

Technically, a rare situation occurs in which you could get into trouble using xargs. By default, the end-of-file string is an underscore (_); if that character is sent as a single input argument, everything after it is ignored. As a precaution against this, use the -e flag, which, without arguments, turns off the end-of-file string completely.

Avoid piping a grep to wc -l in order to count the number of lines of output. The -c option to grep gives a count of lines that match the specified pattern and is generally faster than a pipe to wc, as in the following example:

Listing 17. Example of good habit #8: Counting lines with and without grep
~ $ time grep and tmp/a/longfile.txt | wc -l
2811

real    0m0.097s
user    0m0.006s
sys     0m0.032s
~ $ time grep -c and tmp/a/longfile.txt
2811

real    0m0.013s
user    0m0.006s
sys     0m0.005s
~ $ 

An addition to the speed factor, the -c option is also a better way to do the counting. With multiple files, grep with the -c option returns a separate count for each file, one on each line, whereas a pipe to wc gives a total count for all files combined.
However, regardless of speed considerations, this example showcases another common error to avoid. These counting methods only give counts of the number of lines containing matched patterns -- and if that is what you are looking for, that is great. But in cases where lines can have multiple instances of a particular pattern, these methods do not give you a true count of the actual number of instances matched. To count the number of instances, use wc to count, after all. First, run a grep command with the -o option, if your version supports it. This option outputs only the matched pattern, one on each line, and not the line itself. But you cannot use it in conjunction with the -c option, so use wc -l to count the lines, as in the following example:

Listing 18. Example of good habit #8: Counting pattern instances with grep
~ $ grep -o and tmp/a/longfile.txt | wc -l
3402
~ $

In this case, a call to wc is slightly faster than a second call to grep with a dummy pattern put in to match and count each line (such as grep -c).
A tool like awk is preferable to grep when you want to match the pattern in only a specific field in the lines of output and not just anywhere in the lines.
The following simplified example shows how to list only those files modified in December:

Listing 19. Example of bad habit #9: Using grep to find patterns in specific fields
~/tmp $ ls -l /tmp/a/b/c | grep Dec
-rw-r--r--  7 joe joe  12043 Jan 27 20:36 December_Report.pdf
-rw-r--r--  1 root root  238 Dec 03 08:19 README
-rw-r--r--  3 joe joe   5096 Dec 14 14:26 archive.tar
~/tmp $

In this example, grep filters the lines, outputting all files with Dec in their modification dates as well as in their names. Therefore, a file such as December_Report.pdf is matched, even if it has not been modified since January. This probably is not what you want. To match a pattern in a particular field, it is better to use awk, where a relational operator matches the exact field, as in the following example:

Listing 20. Example of good habit #9: Using awk to find patterns in specific fields
~/tmp $ ls -l | awk '$6 == "Dec"'
-rw-r--r--  3 joe joe   5096 Dec 14 14:26 archive.tar
-rw-r--r--  1 root root  238 Dec 03 08:19 README
~/tmp $

See Resources for more details about how to use awk.
A basic-but-common grep usage error involves piping the output of cat to grep to search the contents of a single file. This is absolutely unnecessary and a waste of time, because tools such as grep take file names as arguments. You simply do not need to use cat in this situation at all, as in the following example:

Listing 21. Example of good and bad habit #10: Using grep with and without cat 
~ $ time cat tmp/a/longfile.txt | grep and
2811

real    0m0.015s
user    0m0.003s
sys     0m0.013s
~ $ time grep and tmp/a/longfile.txt
2811

real    0m0.010s
user    0m0.006s
sys     0m0.004s
~ $ 

This mistake applies to many tools. Because most tools take standard input as an argument using a hyphen (-), even the argument for using cat to intersperse multiple files with stdin is often not valid. It is really only necessary to concatenate first before a pipe when you use cat with one of its several filtering options.





Post a Comment

0 Comments